Hog3PC to Vision 2.3 PC SAME COMPUTER

How to configure DMX from different sources to Vision

Moderator: Edward

Robby Wolf
Posts: 29
Joined: Fri May 01, 2009 8:06 am

Hog3PC to Vision 2.3 PC SAME COMPUTER

Postby Robby Wolf » Thu Jan 26, 2012 4:16 pm

It is important to start by making sure that you have the correct direct connectivity driver, before trying to connect Hog 3 and Vision 2.3 PC.

This discussion is valid for the following configurations:

Hog 3 PC to Vision 2.3 PC (Same Computer)


Go to the following link to download the latest version of the Hog 3 Connectivity Driver. Make sure that the driver and Hog 3 software versions match.

http://www.flyingpig.com/support/hog3/downloads/archive/wyg/VisualizerConnectivity.shtml

LOAD SHOW

Step 1: Launch a new show or Launch an existing show.

Image


Step 2: Select the fixture library you would like to work with.

Image

The Hog 3 software will now launch. LAUNCH VISION 2.3 PC

Step 1: Now start up Vision 2.3 PC...Once it is open, click on the DMX tab in the upper left. Select Change DMX Provider.

Image


Step 2: After selecting Change DMX Provider, a window will open up, change this from the default to Hog 3.

Image


Step 3: After choosing the Hog 3 DMX... A Wholehog DP Box will pop up in the lower right of your screen. This will scan the network and find the Hog3.

Image



Step 4: Once the Wholehog DP has found the Hog 3, the status will change to "Running" and Info will show "Outputs Active".

Image

If you get "Waiting for Node Association", you must actually patch a fixture in Hog3PC in order for it to start broadcasting.

Feel free to close the Wholehog DP dialog box, which you can access later from the Windows Tray Icon bar.

If you continue to have issues, or questions, contact ESP Vision Support by phone, Live Chat, email or by posting to the forum.

Return to “DMX Connectivity”

Who is online

Users browsing this forum: No registered users and 1 guest