Search found 12 matches

by AJ@esp
Thu Sep 03, 2015 1:48 pm
Forum: DMX Connectivity
Topic: Connect Hog 4 PC/Console V3.2+ to Vision 2.3/4 PC
Replies: 0
Views: 12608

Connect Hog 4 PC/Console V3.2+ to Vision 2.3/4 PC

It is important to start by making sure that you have the correct direct connectivity driver, before trying to connect Hog 4 and Vision 2.3/4 PC. This discussion is valid for the following configurations: Hog 4 Console V3.2+ to Vision 2.3/4 PC Hog 4 PC V3.2+ to Vision 2.3/4 PC (Same or Different com...
by AJ@esp
Fri Jun 28, 2013 2:10 pm
Forum: DMX Connectivity
Topic: Connecting Chamsys MagicQ to Vision via Artnet
Replies: 0
Views: 23167

Connecting Chamsys MagicQ to Vision via Artnet

There are a few things you need to know in order to properly configure the Chamsys MagicQ for it to work properly with ESP Vision. This discussion is valid for the following configurations: Chamsys MagicQ Console/Offline Editor to Vision 3.0 MAC Chamsys MagicQ Console/Offline Editor to Vision 2.3 PC...
by AJ@esp
Sat Feb 09, 2013 10:12 am
Forum: DMX Connectivity
Topic: General Artnet Questions
Replies: 7
Views: 158444

Can you ping between the 2 computers? That is the first think I would check. If not, then that indicates some breakdown in the IP Network connection. Try pinging from both directions. I`m not sure you need a default Gateway... unless you actually have that IP address assigned to a hub of some sort. ...
by AJ@esp
Fri Jul 13, 2012 10:48 am
Forum: DMX Connectivity
Topic: Connecting Martin M1 console to Vision
Replies: 1
Views: 19280

Connecting Martin M1 console to Vision

There are a few things you need to know in order to properly configure the Martin M1 Console for it to work properly with ESP Vision. This discussion is valid for the following configurations: Martin M1 Console to Vision 3.0 MAC Martin M1 Console to Vision 2.3 PC CONFIGURE THE NETWORK: To begin, mak...
by AJ@esp
Fri Jul 06, 2012 12:29 pm
Forum: DMX Connectivity
Topic: Connecting Jands Vista Console to ESP Vision
Replies: 0
Views: 17269

Connecting Jands Vista Console to ESP Vision

There are a few things you need to know in order to properly configure the Jands Vista CONSOLE for it to work properly with ESP Vision. If you are using the offline editor, see other post that addresses the offline editor. This discussion is valid for the following configurations: Jands Vista consol...
by AJ@esp
Fri Dec 16, 2011 10:24 am
Forum: DMX Connectivity
Topic: Connecting ETC OFFLINE editors to Vision via ARTNET
Replies: 0
Views: 21206

Connecting ETC OFFLINE editors to Vision via ARTNET

There are a few things you need to know in order to properly configure the ETC Offline Editors for it to work properly with ESP Vision. There are a few different steps that must be taken compared to the live console. Since the ETC Offline Editor for MAC does NOT actually ouptut anything, this assume...
by AJ@esp
Tue May 31, 2011 12:06 pm
Forum: DMX Connectivity
Topic: General Artnet Questions
Replies: 7
Views: 158444

Due to dll limitations, we no longer use the Artistic License plugins. You should no longer see the Artistic License tray-icon bar. What console are you using?

Demo does work with Artnet
by AJ@esp
Wed Jun 09, 2010 3:11 pm
Forum: DMX Connectivity
Topic: Strand Palette OS V10 (PC/XP) to Vision 3 (Mac) connectivity
Replies: 1
Views: 21541

According to Strand Technical support, there is a bug in V10.6.4 where the offline editor wasn't actually outputting any Artnet. They claim it was fixed in 10.6.6, but we have not been able to verify that it is outputting Artnet either. Seems to be a Strand issue, not Vision.
by AJ@esp
Wed Jun 09, 2010 1:31 pm
Forum: DMX Connectivity
Topic: Connect MAXXYZ to Vision using Artnet
Replies: 0
Views: 17919

Connect MAXXYZ to Vision using Artnet

There are a few things you need to know in order to properly configure the MAXXYZ Console for it to work properly with ESP Vision. This discussion is valid for the following configurations: MAXXYZ Console to Vision 3.0 MAC MAXXYZ Console to Vision 2.3 PC CONFIGURE THE NETWORK: To begin, make sure th...
by AJ@esp
Sun May 16, 2010 7:59 am
Forum: DMX Connectivity
Topic: Connecting ETC ION/Nomad to Vision 4.0 MAC&PC or 2.3 PC via Artnet
Replies: 2
Views: 28809

Hey Nick, It all depends upon if the offline editor supports the loopback adapter. We have noticed that not all MAC products include some sort of loopback adapter support. In fact, we have had ZERO success getting Jands Vista offline editor on the same machine to connect... We are testing the ETC of...
by AJ@esp
Thu Feb 11, 2010 9:22 am
Forum: DMX Connectivity
Topic: General Artnet Questions
Replies: 7
Views: 158444

General Artnet Questions

If you are connecting a specific console to ESP Vision that we have provided guidance on under this Topic, please follow the specific instructions there. However, here are some general things that you may need to consider if you are still having issues. First, DO NOT INSTALL the Artistic License DMX...
by AJ@esp
Mon Jan 11, 2010 5:59 pm
Forum: DMX Connectivity
Topic: Connecting GrandMA Console to Vision 3 MAC
Replies: 0
Views: 23886

Connecting GrandMA Console to Vision 3 MAC

There are a few things you need to know in order to properly configure the GrandMA Console for it to work properly with ESP Vision. This discussion is valid ONLY for GrandMA Console to Vision 3 MAC. Since OnPC does not output Artnet, you are unable to connect GrandMA OnPC to Vision 3 Mac at this poi...

Go to advanced search